How to Put in and Remove Air Optix Colors Lenses

Quick answer

Always wash your hands first, then insert or remove your Air Optix Colors lenses using a clean, dry fingertip. Follow the step-by-step process below to avoid irritation or lens damage.

Step-by-step guide to insert and remove Air Optix Colors

1. 1. Wash and dry your hands: Use a mild, non-cosmetic soap. Rinse thoroughly and dry with a lint-free towel. Any residue or moisture on your fingers can transfer to the lens and cause irritation. Never use hand creams or lotions before handling lenses.
2. 2. Inspect the lens before insertion: Place the Air Optix Colors lens on your index fingertip. Check that it is not inside out (the edges should curve upward like a bowl). Rinse with fresh multipurpose solution if needed. If the lens edges flare out, it is inside out. Flip it and try again.
3. 3. Insert the lens gently: Hold your upper eyelid open with your non-dominant hand. Use your dominant hand to place the lens on your eye. Look down slightly and release the lens slowly. Blink a few times to center it. If the lens feels uncomfortable, remove it, rinse with solution, and reinsert.
4. 4. Remove the lens with a clean pinch: Look up and pull your lower eyelid down. Gently pinch the lens with your thumb and index finger. Slide it down slightly before pinching to avoid suction. Never use fingernails to scrape the lens off your eye.
5. 5. Clean and store the lens overnight: Rub the lens with multipurpose solution for 20 seconds, then rinse. Place it in a clean case filled with fresh solution. Never reuse old solution. Replace your lens case every 1-3 months to prevent bacterial buildup.

Product facts

• Air Optix Colors - 6 pack: Air Optix Colors are monthly disposable lenses made of 67% lotrafilcon B, with 12 color options. The silicone hydrogel material allows high oxygen transmission, making them comfortable for up to 30 days of wear, but proper daily cleaning is still critical to maintain eye health.