Back to Blog
Tips & Care 2026-11-13 Lensabl 0 views

Ultra Multifocal for Astigmatism 6 Pack: Handling Tips

Ultra Multifocal for Astigmatism 6 Pack: Handling Tips

A practical handling routine for Bausch + Lomb ULTRA Multifocal for Astigmatism lenses, from opening the 6-pack to storing your supply and planning a custom order.

Start with the lens that arrives, not the one you expect

The Bausch + Lomb ULTRA Multifocal for Astigmatism is a custom-manufactured monthly lens. The supplied product record notes that it generally takes about 3-4 weeks to ship, and that this manufacturing time applies to all doctors and retailers selling this lens. Build that lead time into your handling plan before you open anything.

Each 6-pack contains six lenses in buffered saline solution. The record lists 54% samfilcon A material and a 3-Zone Progressive design for presbyopia plus OpticAlign for astigmatism. Those design names describe the lens; they do not replace the fitting and handling instructions your eye care professional gives you.

A careful opening and first-use routine

The supplied record does not include step-by-step insertion or cleaning instructions. Use the routine your eye doctor or the lens packaging provides, and treat the checkpoints below as handling habits that keep a custom monthly lens in good condition.

  1. Check the pack before opening: Confirm the 6-pack is sealed and that the prescription matches what your eye doctor ordered. Because this lens is custom manufactured, a mismatch is worth catching before you open a blister.
  2. Wash and dry your hands first: Handle lenses with clean, dry hands. Avoid soap residue, lotions, and oily cosmetics on your fingers, since those can transfer to a monthly lens you will wear repeatedly.
  3. Work over a clean, well-lit surface: A clear counter and good light make it easier to keep the lens and the blister pack from picking up dust or coming into contact with the sink.
  4. Keep the blister and lens case separate from the sink: Monthly lenses go back into a clean case with fresh solution after wear. Keeping the case away from the sink reduces the chance of tap water contact.
  5. Insert with the lens fully hydrated: The record mentions MoistureSeal technology and a 16-hour moisture claim, but it does not supply insertion steps. Follow your eye doctor's guidance for how long to let a lens settle before judging comfort.

What the 6-pack record confirms

  • Ultra Multifocal for Astigmatism - 6 pack: Lens type: monthly disposable soft contact lenses; 6 lenses per box in buffered saline solution. A 6-pack gives you six monthly lenses, so opening and storage habits affect how many usable lenses you get from each box.
    Ultra Multifocal for Astigmatism - 6 pack
    Ultra Multifocal for Astigmatism - 6 pack
  • Ultra Multifocal for Astigmatism - 6 pack: Material: 54% samfilcon A; manufacturer: Bausch & Lomb. Knowing the material and manufacturer helps you match the lens to the prescription your eye doctor selected and avoid mixing it up with another monthly lens.
  • Ultra Multifocal for Astigmatism - 6 pack: Annual supply: 4 boxes. Four 6-packs cover a year of monthly lens wear, which is useful when you plan storage and reorder timing around the 3-4 week custom build.

Why a rotating toric multifocal needs a steady routine

A toric design corrects astigmatism, and a multifocal design adds zones for near, intermediate, and distance vision. The supplied record names OpticAlign for astigmatism and a 3-Zone Progressive design for presbyopia, but it does not describe how the lens should sit or how to check rotation. Those checks belong to your eye doctor's fitting process.

What you can control is consistency. Handle the lens the same way each time, keep your case clean, and avoid letting a monthly lens dry out or sit in old solution. If a lens feels different from the previous one in the box, note it and raise it with your eye care professional rather than adjusting the lens yourself.

Storage and solution habits for a monthly toric multifocal

The supplied record does not name a specific contact lens solution for this lens. Ask your eye doctor which solution is compatible with your full care regimen, and follow the product labeling rather than switching brands casually.

  • Use fresh solution, not topped-off solution: Discard the solution in your case after each wear period and refill with fresh solution. Topping off old solution is a common handling shortcut that undermines a monthly lens routine.
  • Keep the case clean and dry between uses: Rinse the case with the solution your eye doctor recommends and let it air-dry face down on a clean tissue. Replace the case on the schedule your eye care professional advises.
  • Store the 6-pack away from heat and direct sun: Keep unopened blisters in a cool, dry place. Do not freeze lenses or leave them in a hot car, since temperature extremes can affect the buffered saline and the lens.
  • Track which lens is left and right: Keep your case marked clearly. Mixing left and right lenses is a handling error that can make a well-fitted toric multifocal feel wrong.

Planning your supply around the custom build

The 3-4 week manufacturing time is the main practical difference between this lens and an off-the-shelf monthly lens. Plan your reorder before your last pair, not after.

  • New wearer: Order your first 6-pack with the expectation of a 3-4 week wait. Keep any trial lenses your eye doctor supplied until the custom lenses arrive.
  • Established wearer: With four boxes making an annual supply, reorder when you open your last box rather than when you finish it, so the custom build time does not leave you without lenses.
  • Travel or schedule changes: If you will be away when a reorder would normally arrive, place the order earlier. The record gives a general 3-4 week window, not a guaranteed delivery date.

What the supplied information leaves to your eye doctor

The record does not include cleaning steps, replacement timing beyond the monthly lens type, specific solution recommendations, or instructions for checking toric rotation. It also does not confirm compatibility with any particular solution brand. Treat those as questions for your eye care professional, and use the product record for what it does confirm: the 6-lens pack, the 54% samfilcon A material, the Bausch & Lomb manufacture, and the 3-4 week custom build.

If you are comparing this lens with another monthly multifocal toric option, the handling routine above still applies. The difference will be in the fit and design your eye doctor selects, not in shortcuts you can take with storage or solution.

Related Articles

Customer Service
Home
Products
Cart
Profile